Machine Control Systems
Trimble offers you the most complete line of Grade Control Systems. From laser or sonic-based to 3D, these rugged Machine Control systems are easy to use, fully upgradeable, and flexible enough to meet a wide range of application and jobsite requirements.
Site Supervision
Trimble have developed solutions for supervisors in road work, site preparation, earthworks, landfill, marine construction and mining. Designed for use on the supervisor's vehicle, they allow the supervisor to check finished grade, monitor real-time cut/fill information in specific locations and assess work progress across the site.
Trimble SCS900 Site Controller Software Tablet Edition
The Trimble SCS900 Site Controller Software Tablet Edition (TE) combines the easy-to-use data management system of Trimble SCS900 software with the graphics capabilities and processing power of a tablet PC.
Trimble SPS651 Modular GPS Receiver & Trimble Site Supervisor System
The Trimble® SPS651 Modular GPS Receiver is designed for use on a construction supervisor's vehicle - where cost-effective real-time positioning is required.
3D Machine Control and Guidance Systems
The Trimble GCS900 System offers full 3D Machine Control.
Trimble GCS900 Grade Control System
3D Grade Control System available in a range of configurations.
Conventional Grade Control Systems
Conventional systems begin with a single laser receiver system, and progress to combinations of laser receivers, sonic tracers, angle sensors and rotation sensors.
Trimble GCS300 Grade Control System
Affordable single control system, suited primarily to dozers.
Trimble GCS400 Grade Control System
Dual Elevation or Elevation and Blade Slope Control.
Trimble GCS500 Grade Control System
The GCS500 Grade Control System is a cross-slope control system designed to be used on motor graders for fine grading work.
Trimble GCS600 Grade Control System
The GCS600 Grade Control System is a highly flexible, cross slope and elevation control system designed to be used on motor graders for fine grading work.
Trimble GCS600 Grade Control System for Excavators
The Trimble® GCS600 Grade Control System for Excavators is a highly flexible laser-based system designed for excavation, trenching, grading and profile work.
Laser-based Display Systems
Using a grade display receiver guides the operator to the desired elevation or depth without a grade checker, you improve accuracy and increase profits.
Spectra Precision Laser CB30 Dual Control Box
Rugged, interface for dual laser-based Spectra Precision Laser machine control systems.
Spectra Precision Laser CR600 Laser Receiver
Advanced receiver that can be rod or machine mounted for increased productivity.
Spectra Precision Laser LR30 Display Receiver
Rugged 360-degree laser receiver for machine applications.
Spectra Precision Laser LR50 Display Receiver
Rugged 360-degree laser receiver with blade tilt and boom plumb indication.
Spectra Precision Laser LR60 Display Receiver
Rugged 360 laser receiver with patented Angle Compensation for Excavators.
Grade Control Supporting Infrastructure
Trimble has a range of products that help to connect the construction site for effective Grade Control.
Spectra Precision Laser GL412 & GL422 Grade Lasers
Rugged, self-levelling lasers for grading and excavating
Spectra Precision Laser GL700 Series Grade Laser
The GL700 Series gives you the right laser for the right job, from an economical single grade transmitter to an advanced, long-range radio remote controlled steep grade transmitter.
Trimble SPS751 and SPS851 Modular GPS Receivers
Trimble® SPS751 and SPS851 Modular GPS Receivers are ideal for semi-permanent or permanent setups, marine-based applications, as well as construction rover applications. The antennas can also be mounted in a marine vessel or on a site supervisor's vehicle.
Trimble SPS730 and SPS930 Universal Total Stations
The new Trimble® SPS730 and SPS930 Universal Total Stations were designed specifically for the high traffic scenarios typically found on a construction site.
